"Bringing the Welding World Together"

Excelloy Stainex A/AL AC/DC+ :

Superior electrode designed for use on most common grades of stainless steels

Developed for use on most common grades of stainless steels. Typically used to fabricate and repair food, dairy, and chemical equipment. Particularly good when used on stainless steels: 301, 302, 302B, 305, 308, 308L, 321, 347, and all AISI 200 and 400 types.


Welding Procedure

Clean and prepare weld zone in accordance with standard welding practice. Do not preheat base metal. Tack parts to maintain alignment and reduce distortion. Maintain a short or drag arc length as you tilt the electrode 15 degrees in direction of travel. Prevent excessive heat build up by skip welding whenever possible. Remove slag between passes and allow to slow cool.


Technical Data

Tensile strength.................................Up to 88,000PSI
Yield strength.....................................Up to 66,000PSI
Elongation..........................................45%

 

Operating Parameters

Amperages     40-75    40-105     80-140    100-175
Diameter (in)  3/32”     1/8”         5/32”       3/16”

*Excelloy A is for applications requiring controlled higher carbon content.